Specifications
Our Operating Principle
We have been involved in the design and manufacture of these connectors for more than forty years. As a result, we have made a variety of improvements that have been incorporated into the products shown in this catalog. Marshall Underwater Industries, Inc. offers the most extensive experience available for this type of product.
![op_prin op_prin](http://ocean-innovations.net/images/Marshall%20Underwater/op_prin-300x96.gif)
The male pin is flared at the tip and oversized to the inside diameter of the female socket. This ensures a wiping action and a positive seal by forcing water through the length of the female socket and out the vent.
FEATURES
- All products in this brochure are capable of being mated or unmated underwater with electrical power de-energized.
- Precision interference fit between contacts and neoprene-neoprene interface ensures waterproof integrity when correctly installed and maintained.
- Longer connector body length for easier handling.
- Threaded fittings are available in nickel aluminum bronze or 316 stainless steel and are designed for O ring sealing. All are supplied with an O ring.
- Bulkhead connectors are molded directly to the face of all threaded fittings to provide maximum strength.
ELECTRICAL SPECIFICATIONS
Rating per contact
- -115 Volt/6.5 Amps
- -230 Volt/15 Amps
Insulation resistance
- -100 megohms at 500 V-DC, contact-contact-ground
Dielectric Test Rating
PRESSURE RATINGS
Bulkhead Connectors
Cable Connectors
ELECTRICAL POWER MUST BE OFF BEFORE CONNECTING OR SEPARATING ANY OF THESE PRODUCTS.
Disclaimer: We do not guarantee compatibility with similar products manufactured by other firms.