This is a large box corer that requires a vessel large enough for deployment and transfer.
Material: Stainless Steel
Weight: 980 kilos
Height: 212 cm
Deck footprint: 200 cm X 250 cm
Box area: 75 cm X 75 cm X 60 cm
Box Corers are used to sample soft sediments in lakes and oceans. The corer is lowered vertically until it impacts the seabed. At this point, the instrument is triggered by a trip as the main coring stem passes through its frame. While pulling the corer out of the sediment the spade swings underneath the sample to prevent loss. The recovered sample is completely enclosed after sampling, reducing the loss of finer materials during recovery. Stainless steel doors, kept open during the deployment to reduce any “bow-wave effect” during sampling, are triggered on sampling and remain tightly closed, sealing the sampled water from that of the water column. On recovery, the sample can be processed directly through the large access doors or via the removal of the box completely, together with its cutting blade.
A properly designed and operated box corer is suitable for collecting zoo- benthos (Gage & Tyler 1991, Paterson et al. 1998), surficial sediments (McCave 1985, Ekeroth et al. 2012), and surface concretions (Hessler & Jumars 1974, Veillette et al. 2007). A box corer can also be used for sub-coring to minimize core shortening or for taking replicate subsamples (Blomqvist & Boström 1987).
For more information, please contact us at (858) 454-4044 or firstname.lastname@example.org.