SubConn Micro Circular Double O-ring – 2, 3, 4, 5, 6 and 8 contacts and G2 2, 3 and 4 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

• Voltage rating: 300 V DC/AC rms
• 2, 3 and 4 contacts current rating: 10 A per contact (max 20 A per connector)
• 5, 6 and 8 contacts current rating: 5 A per contact (max 20 A per connector)
• G2 2, 3 and 4 contacts connector current rating: 5 A per contact (max 20 A per connector)
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0.01 ohm
• Wet matings: > 500
• Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
• Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
• Qualified pressure tested: 800 bar, 11,600 psi
• Depth rating PEEK: 300 bar, 4,350 psi

Material specifications

• Connector body: Chloroprene rubber
• Bulkhead body with 20 mm hex flats: Brass, titanium, or anodized aluminum
• Bulkhead body with 22 mm hex flats: Anodised aluminum or stainless steel
• Bulkhead RA body: Aluminium or titanium
• 2, 3, and 4 contacts: Gold plated brass UNS – C36000
• 5, 6, 8 contacts and G2 2, 3, and 4 contacts: Female sockets in gold plated brass UNS C36000, Male pins in gold plated beryllium copper
• Location pin: Stainless steel AISI 303
• O-rings: Nitrile
• Locking sleeves: ABS or stainless steel
• Snap rings: Stainless steel AISI 302
• 2, 3, and 4 contact bulkhead leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 colored PTFE
• 5, 6, and 8 contact bulkhead leads (1 ft, 30 cm): 22 AWG, 0.33 mm2 colored PTFE
• G2 2, 3, and contact 4 bulkhead leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 colored PTFE

Face view (male)

Step files

X_B files

Related files

SubConn Micro Circular Double O-ring – 2, 3, 4, 5, 6 and 8 contacts and G2 2, 3 and 4 contacts