SubConn Micro Low Profile – 7 and 9 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

• Voltage rating: 300 V DC/AC rms
• Current rating: 5 A per contact (max 20 A per connector)
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0.01 ohm
• Wet matings: > 500
• Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
• Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
• Qualified pressure tested: 800 bar, 11,600 psi
• Depth rating PEEK: 300 bar, 4,350 psi

Material specifications

• Connector body: Chloroprene rubber
• Bulkhead body: Brass, stainless steel, titanium, anodized aluminum, or PEEK
• Contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper
• O-rings: Nitrile
• Locking strap: Chloroprene rubber
• Inline cable (2 ft, 60 cm): 20 AWG, 0.52 mm2 chloroprene rubber
• Bulkhead leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 colored PTFE
• OM leads (3″, 7 cm): 20 AWG, 0.52 mm2 coloured PTFE

Face view (male)

Inline cable color code

1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
7: White/black
8: Red/black*
9: Green/black
10: Orange/black**

* Micro 7 contacts connector uses an 8 conductor cable (only 7 conductors are used)
** Micro 9 contacts connector uses a 10 conductor cable (only 9 conductors are used)

Nominal cable outside diameter (OD)

8 conductor cable 0.363’’, 9.2 mm
10 conductor cable 0.406’’, 10.3 mm

7 and 9 conductor cables are not available, therefore 8 and 10 conductor cables are to be used.

Step Files

X_B files

Related files

Micro Low Profile – 7 and 9 contacts.pdf