SubConn Power Battery – 2, 3 and 4 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

• Voltage rating: 600 V DC/AC rms
• Current rating: 25 A per contact (max 50 A per connector)
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0,01 ohm
• Wet matings: > 500
• Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
• Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
• Design depth rating: 1,400 bar, 20,000 psi
• Qualified pressure tested: 800 bar, 11,600 psi
• Depth rating PEEK: 300 bar, 4,350 psi

Material specifications

• Connector body: Chloroprene rubber
• Bulkhead body: Brass, stainless steel, titanium, anodized aluminum, or PEEK
• Contacts: Gold plated brass UNS – C36000
• Location pin: Stainless steel AISI 303
• O-rings: Nitrile
• Locking sleeves: POM or stainless steel
• Snap rings: Stainless steel AISI 302
• 2 and 3 conductors inline cable (2 ft, 60 cm): 10 AWG, 5.26 mm2 chloroprene rubber
• 4 conductor inline cable (2 ft, 60 cm): 12 AWG, 3.30 mm2 chloroprene rubber
• 2 and 3 contact bulkhead and PBOF leads (1 ft, 30 cm): 10 AWG, 5.26 mm2 white tagged PTFE
• 2 and 3 contact OM leads (3″, 7 cm): 10 AWG, 5.26 mm2 white tagged PTFE
• 4 contact bulkhead and PBOF leads (1 ft, 30 cm): 12 AWG, 3.31 mm2 white tagged PTFE
• 4 contact OM leads (3″, 7 cm): 12 AWG, 3.31 mm2 white tagged PTFE

Face view (male)

Inline cable color code

1: Black
2: White
3: Red
4: Green

(3 conductor cable color code: 1 black, 2 white, 3 green)

Nominal cable outside diameter (OD)

2 conductor cable 0.640”, 16.3 mm
3 conductor cable 0.671”, 17.0 mm
4 conductor cable 0.660”, 16.5 mm

Step files

X_B files

Related files

SubConn Power Battery – 2, 3 and 4 contacts