DTG3 Navigator
DTG3 Navigator ROV for the everyday underwater professional
An added precision thruster and advanced USBL positioning system make the Navigator Package an extremely advanced and maneuverable ROV with the same portability and durability Deep Trekker pilots are accustomed to.
Precision Thruster
The precision thruster at the rear of the vehicle enables users to move up and down without utilizing the pitch function. With the precision thruster engaged pilots can make depth changes without any rotation of the ROV, making it ideal for the trickiest of observation and inspection needs.
USBL System – Underwater GPS
The ultra-short baseline (USBL) system uses triangulation to indicate the position of the ROV. Wifi-enabled maps allow you to see where both the controller and the ROV are located on a detailed map.
4K camera
The 4K internal camera is easy to use, with live zero latency viewing on the handheld controller and a 270-degree rotating field of view. Switch to photo mode to snap photos up to 8 megapixels.
Built to last
Deep Trekker ROVs are constructed with cast aluminum, anodized, and an expoxy coated for corrosion resistance. Its unique spherical design has inherent strength and is combined with proprietary, no-maintenance thrusters. Deep Trekker’s clean-sheet design and expert innovation ensure the system will last for years. If you require upgrades or new capabilities, you can enhance your system with industry-specific add-ons and attachments.
- DTG3 ROV
- 656 ft (200 m) Tether on Reel
- Heavy-duty tether reel with bearings and electrical slip ring for easy tether management
- 7-inch, sunlight-readable, Controller
- Wheeled Pelican Case
- Hybrid power
- Intelligent sensor package complete with depth and heading
- 2 Function grabber arm
- Laser scaler
- Buoyancy weight set
- Operator manual
- 1 Year Warranty
DTG3 General Specs
| Width | 325 mm (12.8”) |
|---|---|
| Height | 258 mm (10.2”) |
| Length | 279 mm (11.0”) |
| Warranty | 1 Year – Parts and Labor (optional 2-3) |
| Depth Rating | 200 m (656 ft) |
| Body Material | Die Cast Aluminum |
| Case (option) | Custom Pelican Air 1637 Handle and Wheels |
| Operating Temp | -10°C to 50°C (14°F – 122°F) |
| Weight (in air) | 8.5 kg (18.7 lb) |
| Window Material | Acrylic |
DTG3 Electrical Specs
| System Voltage | 19.2 VDC |
|---|---|
| Battery Recharge | 1.5 Hours |
| Battery Run Time | Up to 8 Hours (Hybrid power) |
| Thruster Control | Independent, Infinitely Variable, 100% Reversible |
Controller with BRIDGE Technology
| Screen | 178 mm (7”) Wide-Angle LCD |
|---|---|
| Controller | 16:9 Up to 4K Recording, Waterproof, Connectivity USB, SD, HDMI, and Ethernet |
ROV Lights & Camera
| Video | UHD 4K – 3840X2160, 720p – 1280×720, 30FPS 0.001 Lux, 280° Total Range of View |
|---|---|
| Length | 279 mm (11.0”) |
| Lights | High-Efficiency LED, Fully Dimmable, 1000 Lumens Tracking with Camera, Optional: 1000-4400 Lumens Add-ons |
| Picture | JPG 8mp |
ROV Tether
| Tether Length | 50 m (Can Customize in Quote) |
|---|---|
| Tether Weight | Neutrally Buoyant in Water |
| Custom Lengths | Up to 400 m (1,312 ft) |
| Tether Diameter | 5.0 mm (0.19′) |
| Tether Construction | Polyurethane outer jacket with embedded lightweight synthetic fibers |
| Maximum Working Strength | 25 kg (55 lbs) |
| Minimum Breaking Strength | 90 kg (200 lbs) |
