SubConn Circular – 6, 8, and 10 Contacts

SubConn Circular - 6, 8 and 10 contacts

Drawing Information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector Specifications

Voltage rating: 600 V DC/AC rms
Current rating: 10 A per contact (max 50 A per connector)
Insulation resistance: > 200 Mohm
Contact resistance: < 0.01 ohm
Wet matings: > 500
Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
Design depth rating: 1,400 bar, 20,000 psi
Qualified pressure tested: 800 bar, 11,600 psi
Depth rating PEEK: 300 bar, 4,350 psi

Material Specifications

Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium, anodized aluminum, or PEEK
Contacts: Gold plated brass UNS – C36000
Location pin: Stainless steel AISI 303
O-rings: Nitrile
Locking sleeves: POM or stainless steel
Snap rings: Stainless steel AISI 302
6 and 8 conductors inline cable: (2 ft, 60 cm) 16 AWG, 1.31 mm2 chloroprene rubber
10 conductor inline cable (2 ft, 60 cm): 18 AWG, 0.82 mm2 chloroprene rubber
Bulkhead and PBOF leads (1 ft, 30 cm): 18 AWG, 0.82 mm2 colored PTFE
OM leads (3″, 7 cm): 18 AWG, 0.82 mm2 colored PTFE

Face view (male)

SubConn Circular - 6, 8 and 10 contacts Face View(Male)

Inline cable color code

1: Black
2: White
3: Red
4: Green
5: Orange
6: Blue
7: White/black
8: Red/black
9: Green/black
10: Orange/black

Nominal cable outside diameter (OD)

6 conductor cable 0.520’’, 13.2 mm
8 conductor cable 0.555’’, 14.1 mm
10 conductor cable 0.605’’, 15.4 mm

3D files

Please note that our 3D files are not 100 percent dimensionally stable.
If a 3D file is needed for tolerance issues, please contact Ocean Innovations for more information.

Step files

X_B files

Circular

Related files

SubConn Circulars 6, 8, and 10 contacts

CONTACT US FOR MORE INFO

Call us

(858) 454-4044

Address

7416 Cabrillo Avenue, La Jolla, CA  92037, United States