SubConn Metal Shell 1500 – 2, 3, 4, 5, 6 and 8 contacts and G2 2, 3 and 4 contacts

metal_shell_1500_2-3-4-5-6and8andg2-2-3and4_contacts-2

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

  • Voltage rating: 300 V DC/AC rms
  • 2, 3 and 4 contacts current rating: 10 A per contact (max 20 A per connector)
  • 5, 6 and 8 contacts current rating: 5 A per contact (max 20 A per connector)
  • G2 2, 3 and 4 contacts current rating: 5 A per contact (max 20 A per connector)
  • Insulation resistance: > 200 Mohm
  • Contact resistance: < 0.01 ohm
  • Wet matings: > 500
  • Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
  • Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
  • Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
  • Qualified pressure tested: 800 bar, 11,600 psi

Material specifications

  • Connector body: Chloroprene rubber
  • Connector housing: Stainless steel AISI 316 (other materials on request)
  • Contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper
  • Location pin: Stainless steel AISI 303
  • Locking sleeves: ABS or stainless steel
  • Snap rings: Stainless steel AISI 302
  • 2, 3, and 4 contact bulkhead leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 colored PTFE
  • 5, 6, and 8 contact bulkhead leads (1 ft, 30 cm): 22 AWG, 0.33 mm2 colored PTFE
  • G2 2, 3, and 4 contact bulkhead leads (1 ft, 30 cm): 20 AWG, 0.52 mm2 colored PTFE

Face view (male)

SubConn Metal Shell 1500 - 2, 3, 4, 5, 6 and 8 contacts and G2 2, 3 and 4 contacts Face View(male)

3D files

Please note that our 3D files are not 100 percent dimensionally stable.
If a 3D file is needed for tolerance issues, please contact Ocean Innovations for more information.

Step files

X_B files

Related files

SubConn Metal Shell 1500 – 2, 3, 4, 5, 6 and 8 contacts and G2 2, 3 and 4 contacts

CONTACT US FOR MORE INFO

Call us

(858) 454-4044

Address

7416 Cabrillo Avenue, La Jolla, CA  92037, United States