SubConn Metal Shell 2000 – 2, 3, 4 contacts and Micro 10 and 12 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

• 2, 3 and 4 contacts voltage rating: 600 V DC/AC rms
• 10 and 12 contacts voltage rating: 300 V DC/AC rms
• 2, 3 and 4 contacts current rating: 10 A per contact (max 30 A per connector)
• 10 and 12 contacts current rating: 5 A per contact (max 30 A per connector)
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0.01 ohm
• Wet matings: > 500
• Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
• Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
• Qualified pressure tested: 800 bar, 11,600 psi

Material specifications

• Connector body: Chloroprene rubber
• Connector housing: Stainless steel AISI 316 (other materials on request)
• 2, 3, and 4 contacts: Brass UNS – C36000
• 10 and 12 contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper
• Location pin: Stainless steel AISI 303
• O-rings: Nitrile
• Locking sleeves: POM or stainless steel
• Snap rings: Stainless steel AISI 302
• 2, 3, and 4 contacts: bulkhead leads (1 ft, 30 cm) 18 AWG, 0.82 mm2 white tagged PTFE
• 10 and 12 contacts: bulkhead leads (1 ft, 30 cm) 20 AWG, 0.52 mm2 white tagged PTFE

Face view (male)

Step files

X_B files

Related files

SubConn Metal Shell 2000 – 2, 3, 4 contacts and Micro 10 and 12 contacts