SubConn Ethernet Circular Double O-ring – 8 and 13 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

• Voltage rating: 600 V DC/AC rms (13 contacts only)
• The voltage rating on data wire: 250 V DC/AC rms
• Current rating on power wire: 4 A per contact (max 16 A per connector) (13 contacts only)
• Data rate: 1 Gbit/s
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0.01 ohm
• Wet matings: > 500
• Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
  Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
• Qualified pressure tested: 600 bar, 8,700 psi

Material specifications

• Connector body: Chloroprene rubber
• Bulkhead body: Brass, stainless steel, titanium, or anodized aluminum
• Contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper
• O-rings: Nitrile
• Locking sleeves: POM or stainless steel
• Snap rings: Stainless steel AISI 302
• Bulkhead leads (3.3 ft, 100 cm): CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 coloured PTFE (13 contacts only), incl. RJ 45 connector (not installed)

Face view (male)

Step files

X_B files

Related files

Ethernet Circular Double O-ring – 8, 13 contacts.pdf