SubConn Power Ethernet Low Profile – 13 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

• Voltage rating: 600 V DC/AC rms
• Voltage rating on data wire: 250 V DC/AC rms
• Current rating on power wire: 4 A per contact (max 16 A per connector)
• Data rate: 1 Gbit/s (up to 75 m)
• Insulation resistance: > 200 Mohm
• Contact resistance: < 0.01 ohm
• Wet matings: > 500
• Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
• Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
• Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
• Qualified pressure tested: 600 bar, 8,700 psi
• Depth rating PEEK: 300 bar, 4,350 psi

Material specifications

• Connector body: Chloroprene rubber
• Bulkhead body: Brass, stainless steel or titanium
• Contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper
• O-rings: Nitrile
• Locking straps: Chloroprene rubber
• Inline cable (3.3 ft, 100 cm): 4 pair 24 AWG, 0.20 mm2 PUR, Power conductors 4 x 18 AWG, 0.82 mm2, Screen: Tinned copper braid
• Bulkhead leads (3.3 ft, 100 cm): CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 colored PTFE incl. RJ 45 connector (not installed)

Face view (male)

Inline cable color code

1: Black
2: Screen (orange wire on bulkhead)
3: White
*4-5: Brown, Brown/white
*6-7: Blue, Blue/white
*8-9: Orange, Orange/white
*10-11: Green, Green/white
12: Red
13: Green

* Twisted pairs

Nominal cable outside diameter (OD)

PUR cable 0.550”, 13.97 mm

Additional information

Standard RJ45 cannot be mounted on inline cable and will require an RJ45 Phoenix connector or equivalent.

Step files

X_B files

Related files

SubConn Power Ethernet Low Profile – 13 contacts