SubConn Ethernet Low Profile – 9 contacts




SubConn Ethernet Low Profile - 9 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

  • Voltage rating: 250 V DC/AC rms
  • Data rate: 1 Gbit/s (up to 75 m)
  • Insulation resistance: > 200 Mohm
  • Contact resistance: < 0.01 ohm
  • Wet matings: > 500
  • Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
  • Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
  • Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
  • Qualified pressure tested: 600 bar, 8,700 psi
  • Depth rating PEEK: 300 bar, 4,350 psi

Material specifications

  • Connector body: Chloroprene rubber
  • Bulkhead body: Brass, stainless steel, titanium, anodized aluminum, or PEEK
  • Contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper
  • O-rings: Nitrile
  • Locking straps: Chloroprene rubber
  • Inline cable (3.3 ft, 100 cm): 4 pair 24 AWG, 0.20 mm2 PUR, Screen: Tinned copper braid
  • Bulkhead leads (3.3 ft, 100 cm): CAT 5E patch cable incl. RJ 45 connector (not installed)

Face view (male)

SubConn Ethernet Low Profile - 9 contacts Face View(male)

Inline cable color code

*1-2: Brown, Brown/white
*3-4: Blue, Blue/white
*5-6: Orange, Orange/white
*7-8: Green, Green/white
9: Screen (orange wire on bulkhead)

* Twisted pairs

Nominal cable outside diameter (OD)

PUR cable 0.410”, 10.4 mm

Nominal cable outside diameter (OD)

Standard RJ45 cannot be mounted on inline cable and will require an RJ45 Phoenix connector or equivalent.

3D files

Please note that our 3D files are not 100 p.c. dimensionally stable.
If a 3D file is needed for tolerance issues, please contact MacArtney for more information.

Step files

X_B files

Related files

SubConn Ethernet Low Profile – 9 contacts


CONTACT US FOR MORE INFO

Call us

(858) 454-4044

Address

7416 Cabrillo Avenue, La Jolla, CA  92037, United States