SubConn Power Ethernet Circular – 13 contacts

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

Voltage rating: 600 V DC/AC rms
Voltage rating on data wire: 250 V DC/AC rms
Current rating on power wire: 4 A per contact (max 16 A per connector)
Data rate: 1 Gbit/s (up to 75 m)
Insulation resistance: > 200 Mohm
Contact resistance: < 0.01 ohm Wet matings: > 500
Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
Qualified pressure tested: 600 bar, 8,700 psi
Depth rating PEEK: 300 bar, 4,350 psi

Material specifications

Connector body: Chloroprene rubber
Bulkhead body: Brass, stainless steel, titanium, anodised aluminium or PEEK
Contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper:
O-rings: Nitrile
Locking sleeves: POM or stainless steel
Snap rings: Stainless steel AISI 302
Inline cable (100 cm, 3.3 ft): 4 pair 24 AWG, 0.20 mm2 PUR. Power conductors 4 x 18 AWG, 0.82 mm2. Screen: Tinned copper braid
Bulkhead leads (100 cm, 3.3 ft): CAT 5E patch cable, 5 x 20 AWG, 0.52 mm2 with coloured wires incl. RJ 45 connector (not installed)

Face view (male)

Inline cable colour code

1: Black
2: Screen (orange wire on bulkhead)
3: White
*4-5: Brown, Brown/white
*6-7: Blue, Blue/white
*8-9: Orange, Orange/white
*10-11: Green, Green/white
12: Red
13: Green

* Twisted pairs

Nominal cable outside diameter (OD)

PUR cable 0.550”, 13.97 mm

Additional information

Standard RJ45 cannot be mounted on inline cable and will require a RJ45 Phoenix connector or equivalent.

Step files

X_B files

Related files

SubConn Power Ethernet Circular – 13 contacts