SubConn Ethernet Metal Shell 2000 – 8 contacts

SubConn Ethernet Metal Shell 2000 – 8 contacts

With male inline connector – snap ring in outer groove

With female inline connector – snap ring inner groove

Drawing information

Dimensions in mm (1 mm = 0.03937 inch)
Threads in inches (1 inch = 25.4 mm)

Connector specifications

Voltage rating: 250 V DC/AC rms
Data rate: 1 Gbit/s (up to 75 m)
Insulation resistance: > 200 Mohm
Contact resistance: < 0.01 ohm Wet matings: > 500
Temperature rating (water): – 4 to 60˚C, 25 to 140˚F
Temperature rating (air): – 40 to 60˚C, – 40 to 140˚F
Storage temperature rating: – 40 to 60˚C, – 40 to 140˚F
Qualified pressure tested: 600 bar, 8,700 psi

Material specifications

Connector body: Chloroprene rubber
Connector housing: Stainless steel AISI 316 (other materials on request)
Contacts: Female sockets in gold plated brass UNS – C36000, Male pins in gold plated beryllium copper
O-rings: Nitrile
Locking sleeves: POM or stainless steel
Snap rings: Stainless steel AISI 302
Bulkhead leads (100 cm, 3.3 ft): CAT 5E patch cable incl. RJ 45 connector (not installed)

Face view (male)

SubConn Ethernet Metal Shell 2000 – 8 contacts Face View(male)

Inline cable colour code

*1-2: Brown, Brown/white
*3-4: Blue, Blue/white
*5-6: Orange, Orange/white
*7-8: Green, Green/white

* Twisted pairs

3D files

Please note that our 3D files are not 100 p.c. dimensionally stable.
If a 3D file is needed for tolerance issues, please contact MacArtney for more information.

Step files

X_B files

Related files

SubConn Ethernet Metal Shell 2000 – 8 contacts